The standard t-shirt print size for an adult full front is about 11 to 12 inches wide and up to 12 to 14 inches tall, placed about 3 inches below the collar. A full back runs about 12 inches wide by 14 inches tall, and a short-sleeve print is about 3 to 4 inches wide.
Those are the numbers we'd start from at Conquer Printing in North Highlands, and they work for most adult shirts from small to XL. The catch is that "standard" falls apart the moment your order mixes a youth small with a 3XL, and that's where most sizing mistakes come from. Here's how we actually size a print, and when you should break from the defaults.
Print sizes by location
Here's the quick reference. Width is the number that matters most, since height usually follows from the shape of your art.
| Location | Typical width | Typical max height | Where it sits |
|---|---|---|---|
| Full front (adult) | 11 to 12 in | 12 to 14 in | About 3 in below the collar |
| Full back (adult) | 12 in | 14 in | About 3 to 4 in below the collar |
| Center chest | 8 to 10 in | 4 to 8 in | About 3 in below the collar |
| Left chest | 3 to 4 in | 3 to 4 in | Over the heart, roughly 3 in down |
| Short sleeve | 3 to 4 in | 3 to 4 in | Centered on the outer sleeve |
| Long sleeve (down the arm) | 2 to 3 in | 10 to 14 in | Runs from shoulder toward cuff |
| Nape (back of neck) | 3 to 4 in | 1 to 2 in | Just below the back collar |
| Youth full front | 8 to 10 in | 10 to 11 in | About 2.5 in below the collar |
If the left chest is what you're after, we wrote a whole post on what size a left chest logo should be, including how it shifts on hoodies.
Garment suppliers publish their own location charts too. Alphabroder's screen printing locations guide lists a full front as large as 14 by 16 inches, which is closer to a maximum than a default. We'd only go that big on a 2XL or larger, or when you want an oversized streetwear look on purpose.
Why 12 inches and not bigger
People bring us art and ask for it "as big as possible." We get it. Big feels like more shirt for the money. But a 14-inch print on a men's medium wraps toward the side seams, and the edges of the design end up under the wearer's arms. Nobody sees that part.
There's also a comfort issue. A large plastisol print is a big patch of ink, and on a hot August day in Sacramento a shirt with a solid 14 by 16 block on the front doesn't breathe much. Twelve inches wide reads as a bold full front on almost every adult body and still leaves fabric around it.
Height is more forgiving. A tall, narrow design (think a vertical logo stack or a list of tour dates) can run 14 inches tall at 10 inches wide and look right. A wide, short design like a single line of text might be 12 inches wide and only 3 inches tall. Don't force your art into a square just because the chart says 12 by 14.
The mixed-size problem nobody warns you about
Here's the part most print size guides skip. In screen printing, the image is burned onto a screen at one fixed size. Every shirt in that run gets the exact same print, whether it's a youth small or a 4XL.
So picture a youth soccer league ordering 80 shirts, sizes YS through adult XL, with the same 12-inch front. On the adult XL it looks great. On the youth small it runs nearly seam to seam and tucks under the arms. Go the other way and size it for the kids at 9 inches, and it looks like a postage stamp on the coaches.
There are three honest ways to handle it:
- Pick a middle size. Around 10 to 10.5 inches wide usually reads fine on youth medium through adult large. This is the cheapest fix and what we'd recommend for most mixed orders.
- Split the run into two screens: one print size for youth and adult small, a bigger one for large and up. That adds screen setup, so it costs more, but on a run of 100 or more it's often worth it.
- Print the outlier sizes another way. With DTF, each transfer can be sized per shirt with no extra screen. For a handful of youth or 3XL pieces in a bigger order, that's sometimes the cleanest answer.
If you're not sure which one fits your order, mention it when you reach out and we'll tell you what we'd do.
Sizing for 2XL and up, and for fitted shirts
Bigger shirts can carry bigger prints, but not by as much as you'd guess. A 3XL is wider, but the chest area people actually look at hasn't grown at the same rate. We'd bump a full front from 12 to 13 or 14 inches for an order that's mostly 2XL and up, like a crew of linemen or a men's softball team. Past that you're back to the wrap-around problem.
Women's fitted tees go the other direction. The chest is narrower and there's more shape through the body, so 9 to 11 inches wide sits better than 12. A design centered on a straight-cut men's shirt can also land a little low on a fitted cut. If your order is all fitted tees, raise the print half an inch.
Where the print goes on the back
A full back print should start about 3 to 4 inches below the collar seam. Start it higher and the top of the design hides under the hood on a hoodie, or gets covered by long hair. Start it lower and the design drifts toward the small of the back, which looks like a mistake.
For a nape print (the small logo just below the back collar), keep it short. One to 2 inches tall is plenty. That spot is popular for a web address or a small secondary logo, and it pairs well with a left chest print on the front for staff shirts.
Does the print method change the size?
Somewhat. Screen printing has a hard limit set by the press platen and the screen frame, and most standard setups top out around 14 to 15 inches wide. DTF and DTG have their own maximums, usually close to that range for a full front. Embroidery is a different animal. A full-front embroidered design isn't really a thing on a tee; the stitch count climbs fast and the thin fabric puckers. On a shirt, embroidery belongs on the left chest or the sleeve. Save the big stitched backs for heavy jackets.
The bigger issue isn't the maximum. It's detail at small sizes. A sleeve print at 3 inches wide can't hold fine text, in any method. If your logo has a tagline in tiny letters, either drop the tagline for the sleeve or bump the sleeve print up to 4 inches.
Common Questions
How big should a t-shirt design be?
For an adult full front, make the design about 11 to 12 inches wide. Send the art at that size or larger, and if it's a raster file, at 300 DPI at the final print size. A logo that only exists as a tiny image pulled from a website will look soft no matter how we size it.
What size is a full back print on a t-shirt?
A standard full back print is about 12 inches wide and up to 14 inches tall. It's placed 3 to 4 inches below the collar seam. On 2XL and larger shirts, the back can go to about 14 inches wide.
What size should a sleeve print be?
A short-sleeve print is usually 3 to 4 inches wide and centered on the outside of the sleeve. A long-sleeve "down the arm" print is narrower, about 2 to 3 inches wide, and can run 10 to 14 inches long. Keep text on sleeves short and bold so it stays readable.
Is the print the same size on every shirt in an order?
With screen printing, yes, unless you pay for a second set of screens at a different size. With DTF, each transfer can be sized per shirt. For orders that mix youth and adult sizes, a middle size around 10 inches wide is the usual compromise.
What size is a youth t-shirt print?
A youth full front is usually 8 to 10 inches wide, depending on whether the order runs small or toward youth XL. For a youth-only order, we'd go about 9 inches wide. If you're mixing youth and adult sizes, see the mixed-size section above.
The bottom line
Start at 12 inches wide for an adult full front and 12 by 14 for a full back, then adjust for who's actually wearing the shirt. If your order spans youth to 3XL, settle the mixed-size question before you approve the art. That choice changes the price more than the print size does, and for most mixed orders we'd go with a single 10-inch print.
Conquer Printing has no minimums and free design support, so you can send a rough idea and we'll help with the sizing before anything prints. Standard turnaround is 7 to 10 business days. Plug your quantities into our instant quote calculator to see your price, or get in touch if you want us to look at your art first.
